1×108 Ohm No Clean Liquid Flux Solid Contentliquid Rosin Soldering Flux High Resin Activity
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Colorless And Transparent
|Solid Content (w/w)%
|Specific Gravity (g/ml)
|Acid Value (mg KOH/g)
|Insulation Resistance (85℃/85%RH)
|Closed Flash Point
1×108 ohm No Clean Liquid Flux,
No Clean Liquid Flux solid content,
1×108 ohm liquid rosin soldering flux
Flux products with low solid content and high resin activity No-clean flux
TUOPU X-215T photovoltaic special flux is a low solid content (about 1.4% solid content), low halogen, high activity no-clean flux. It can be used for welding solar cell components.
The resin active system has excellent wettability on the surface of bare copper and solder layer.
Health and safety:
The work area should be equipped with a suitable exhaust device to remove the flux. A large amount of inhalation of flux solvents and active agent volatile substances that volatilize at soldering temperature can cause headaches, dizziness and nausea.
An exhaust device must be installed at the exit of the wave soldering equipment to completely remove volatiles.
Pay attention to protection during use to avoid prolonged skin contact and direct eye contact with flux. If it touches the eyes, please rinse with plenty of clean water and seek medical attention as soon as possible.
|Colorless, clear and transparent liquidt
|Solid content (w/w)%
|Acid value (mg KOH/g)
|Specific gravity (g/ml)
|Insulation resistance (85℃/85%RH)
|Silver chromate paper test
|Closed flash point