Wave Soldering Solder Liquid Flux 0.818 Special Gravity Light Yellow For Electronic
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||High Solid Flux||Appearance||Light Yellow, Clear And Transparent Liquid|
|Odor||Organic Solvent||Solid Content (w/w)||12.0±0.5|
|Acid Value (mg KOH/g)||25±5||Specific Gravity (g/ml)||0.810±0.008|
|Suggested Thinner||FD5050 Thinner||Storage Time||12 Months|
Solder Liquid Flux 0.818 special gravity,
Solder Liquid Flux 11.5 solid content,
wave soldering flux light yellow
Highly active soldering fluid flux special flux for electronic wave soldering light yellow liquid
△ TUOPU THC11 flux is a flux with high solid content (12% solid content) and higher activity. It can be used in foaming, spraying and other forms.
2. Features and advantages
△ Some special activators added to THC11 flux are used to reduce the surface tension between the solder mask and the solder, which greatly reduces the generation of solder balls.
△ The heat-stable activator in the high-solid no-clean flux reduces the incidence of continuous soldering defects in wave soldering and selective soldering.
3. Instructions for use
△ In order to meet the requirements of stable welding performance and electrical performance reliability, the process establishment related to circuit boards and components must meet the requirements of weldability and ion clarity. It is recommended that the assembler put forward relevant regulations on the suppliers of related materials and require the incoming material analysis certificate or the assembler to carry out incoming material inspection.
△ The circuit board should be handled carefully during the assembly process, and only the edges of the circuit board should be grasped. It is recommended to use clean, lint-free gloves.
4.Health and safety
△ The work area should be equipped with a suitable exhaust device to remove the flux. A large amount of inhalation of flux solvents and active agent volatiles that volatilize at soldering temperature can cause headaches, dizziness and nausea. △ The outlet of the wave soldering equipment must be equipped with an exhaust device to completely remove the volatiles.
5. Technical indicators
|Parameter||Typical Value||Parameter||Typical Value|
|Appearance||light yellow, clear and transparent liquid||Specific gravity (g/ml)||0.810±0.008|
|Odor||organic solvent||Chlorine content (%)||0|
|Insulation resistance||>108Ω||Corrosive||no corrosive penetration|
|Solid content (w/w)||12.0±0.5||Suggested thinner||FD5050 thinner|
|p H value||weak acid||Flash point (T.C.C)||14℃|
|Acid value (mg KOH/g)||25±5||Storage time||12 months|
6.Solder Liquid Flux picture