Special Additives Eco Liquid Rosin Flux For Electronic Wave Soldering Flux
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Rosin Type Liquid Flux||Solid Content (w/w)%||5.0±0.5|
|Advantage||Environmental Friendly||Specific Gravity (g/ml)||0.805±0.008|
|Closed Flash Point||14℃||AppearanceTraits||Light Yellow, Clear And Transparent Liquid|
|Storage Time||12 Months|
0.797 gravity flux for electronic soldering,
eco protection flux for electronic soldering,
liquid rosin soldering flux ISO9001
Medium-solid content of high activity additives light yellow liquid special additives for wave soldering
◆ NS319 flux is a no-clean flux with medium solid content (5.0% solid content), halogen-free and high activity. It can be used in foaming, spraying and other forms.
◆ Resin active system has excellent wettability on the surface of bare copper and solder layer.
◆ The welding of multi-layer boards with metallized small holes will show excellent penetration performance.
◆ There are very few residues on the PCB surface after soldering, and the solder joints are uniform and bright and full and can be tested without cleaning.
2. Health and safety
◆ The work area should be equipped with a suitable exhaust device to remove the flux. A large amount of inhalation of flux solvents and active agent volatile substances that volatilize at soldering temperature can cause headaches, dizziness and nausea.
◆ The outlet of the wave soldering equipment must be equipped with an exhaust device to completely remove the volatiles.
◆ Pay attention to protection during use, avoid prolonged skin contact and direct eye contact with flux. If it touches the eyes, please rinse with plenty of clean water and seek medical attention as soon as possible.
◆ NS319 flux contains flammable solvents (flash point is 14 degrees Celsius), and should not be exposed to fire sources or electronic equipment without fire prevention measures.
3. Hazard identification data
|500ppm concentration can irritate the eyes or splash intothe eyes can also irritate the eyes|
|Skin contact||Direct contact may cause skin irritation|
|Inhalation hazard||Inhalation of high concentrations may cause nausea and irritation of the nose and throat; long-term inhalation of high concentrations may cause vomiting or loss of consciousness|
|Ingestion hazards||cause vomiting, diarrhea, and even life-threatening|
|Note||The working average concentration is 300ppm|
4.Rosin type liquid flux picture